Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13708930

- Product Categories
- Temperature and humidity se..
- Dew point temperature and h..
- Temperature and humidity tr..
- Temperature and humidity lo..
- Temperature and humidity da..
- Temperature and humidity ha..
- Dewpoint Transmitter
- Friendly Links
Information Name: | Easidew PRO IS Intrinsically Safe Dewpoint Transmitter |
Published: | 2015-05-26 |
Validity: | 30 |
Specifications: | Easidew PRO IS Intrinsically Safe Dewpoint Transmitter |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | About Easidew PRO IS is a rugged, intrinsically safe two-wire dew point transmitter for measuring the gas or liquid moisture content. It has a series of safety certification, such as IS Class 1 Div 1 Groups A, B, C, D, Ex II 1G Ex ia IIC T4 and IS I 1 ABCD T4 (Ta = + 60 ℃), etc., can be installed in hazardous areas use. Easidew Pro IS installation and operation is very simple transmitter requires a 12 ~ 28V DC power supply, provide a linear output of 4 ~ 20mA all the way to represent the moisture content. Highlights ± 1 ° C accuracy of the measurement of gas or liquid in two-wire connection moisture content ppmV moisture or humidity ppmW output Specifications Performance Range -100 ~ + 20 ° C dew point accuracy of ± 1 ° C dew point (+20 ~ -60 ° C) / ± 2 ° C dew point (-60 ~ -100 ° C) T95 response time is five minutes (from dry to wet) Repeatability 0.5 ° C dew point output / input Output signal 4-20 mA (two-wire current source ). Full range setting output dew point, ppmV, ppmW Output range Dew point: -100 ~ + 20 ° C / gas moisture content: 0-3000 ppmV / liquid moisture content: 0-3000 ppmW supply voltage 12-28 V DC Resistance maximum load 250 Ω @ 12 V; 500 Ω @ 24 V Current consumption max. 23 mA, depending on the output current saturation constant saturation constant 3000 ppmW data within the special 6:00 inquiry form, covering a temperature range of 0 ~ 50 ° C. (Only for measuring moisture in liquid) saturation constant 8 kinds of liquids through the application of software editing within the sensor. Working humidity conditions required 0-100% RH Operating Temperature -40 ~ + 60 ° C maximum working pressure 45 MPa (450 barg) flow sleeve mounted in a standard sample, 1 ~ 5 Nl / min; direct plug-in, 0 ~ 10m / sec mechanical properties of hazardous locations Certificate ATEX - Ex II 1G EX ia IIC T4 / FM - IS I 1 ABCD T4 (Ta = + 60 ° C) CSA - IS Class 1 Div 1 Groups ABCD T4 / IECEx - EX ia IIC T4 (-20 ° C, Ta <+ 60 ° C) Ingress Protection IP66 corresponds to the standard BS EN 60529: 1992; NEMA 4 corresponds to the standard NEMA 250-2003 Housing material stainless steel Filter 80 μm sintered protective cap, HDPE protective cap Mounting Thread 5/8 "- 18 UNF Weight 1.27kg Electrical connection screw clamp terminals, M20 x 1.5mm error message (factory settings) See table Verified supporting barrier KFD2-CR-EX1.20200 KFD2-CR-EX1. 30200 / KFD0-CS-EX1.50P / KFD0-CS-EX2.50P KFD2-STC4-EX1.H / MTL5041, MTL5040 |
Admin>>>
You are the 21070 visitor
Copyright © GuangDong ICP No. 10089450, Wuxi Control Technology Co. emblem Cote All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 21070 visitor
Copyright © GuangDong ICP No. 10089450, Wuxi Control Technology Co. emblem Cote All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility